BRAND NEW *OEM QUALITY* ENGINE OIL PRESSURE (WARNING LIGHT) SWITCH TO SUIT OLD MAZDA VARIOUS MODELS
PLEASE COMPARE YOUR ORIGINAL SENSOR WITH THE IMAGES WE PROVIDED IN THE LISTING AND CHECK THE DETAILED VEHICLE LIST IN THE SUITABILITY SECTION.
- for OE No: 2691-18-501A
- Spanner size: 27 MM
- Switch Pressure: 0.3 bar TO 0.5 bar
- Thread Size: 1/8 GAS
- Length: 37 mm
- Number of pins: 1 -pin connector
- Housing Colour: Black
- High Quality
- OEM Fit and Design
- Easy install
- Simple operation
- AU Seller-Fast and Free Shipping
1* ENGINE OIL PRESSURE SWITCH (1 PIN PLUG).
An Oil Pressure Switch or Sensor is designed to assess the integrity of an engine’s lubrication system. The switch responds to changes in engine oil pressure, and any fault is displayed via illumination of the oil pressure light in the dash.
A faulty oil pressure switch/sensor can lead to low oil levels, which can be very problematic for your engine.
[10/77 – 12/82] MAZDA B SERIES B1800 1.8L 4cyl VC
[06/85 – 12/89] MAZDA B SERIES B2000 2.0L 4cyl FE 61kW
[12/82 – 05/85] MAZDA B SERIES B2000 2.0L 4cyl MA
[03/88 – 10/91] MAZDA B SERIES B2200 2.2L 4cyl F2
[06/85 – 10/91] MAZDA B SERIES B2200 2.2L 4cyl R2 47kW
[03/87 – 12/89] MAZDA B SERIES B2600 2.6L 4cyl 4G54
[01/90 – 10/91] MAZDA B SERIES B2600 2.6L 4cyl G6
[11/91 – 03/96] MAZDA BRAVO B2200 UF 2.2L 4cyl R2 47kW
[11/91 – 12/98] MAZDA BRAVO B2600 UF 2.6L 4cyl G6
[01/99 – 10/06] MAZDA BRAVO B2600 UN 2.6L 4cyl G6
[10/05 – 10/06] MAZDA BRAVO B4000 UN 4.0L V6 1V 154kW
[01/84 – 01/97] MAZDA BUS T3500 3.5L 4cyl SL
[01/78 – 06/80] MAZDA E SERIES E1300 1.3L 4cyl TC
[07/80 – 12/86] MAZDA E SERIES E1400 1.4L 4cyl UC
[01/84 – 06/86] MAZDA E SERIES E1400 1.5L 4cyl D5
[05/78 – 12/83] MAZDA E SERIES E1600 1.6L 4cyl NA
[07/83 – 12/84] MAZDA E SERIES E1600 1.6L 4cyl NA
[01/84 – 12/89] MAZDA E SERIES E2000 2.0L 4cyl FE 61kW
[01/90 – 12/02] MAZDA E SERIES E2000 2.0L 4cyl FE 61kW
[01/84 – 12/02] MAZDA E SERIES E2000 2.0L 4cyl FE 61kW
[01/02 – 12/06] MAZDA E SERIES E2000 2.0L 4cyl FE 71kW
[01/84 – 09/97] MAZDA E SERIES E2200 2.2L 4cyl R2 47kW
[01/80 – 12/81] MAZDA E SERIES E2200 2.2L 4cyl S2 46kW
ABOUT YOUR VEHICLE’S ENGINE OIL PRESSURE SENSOR
What does an oil pressure switch do?
The oil pressure switch is installed in the oil circuit of the engine. It monitors the oil pressure and turns off or on a warning light or controls an oil pressure indicator.
Where are these sensors located?
An oil pressure sensor (switch) is usually installed in the cylinder block close to an oil filter or at the oil filter housing.
Will a malfunctioning oil pressure switch illuminate the warning light or affect vehicle operation?
The oil pressure switch is normally closed. When the ignition is switched on, the oil pressure warning light illuminates. When oil pressure is built up as the engine starts, the switch contact in the oil pressure switch opens and the ground contact for the warning light is interrupted. The warning light goes out.
What are the common causes of failure?
Typically these sensors fail due to a Clogged inlet bore, Contact failure on the connector, Internal short-circuits, Damaged measuring element, Loss of sealing
How to determine if these sensors are malfunctioning?
The best way to test if your sensor is bad is through the lights on the oil pressure gauge. If the low oil pressure warning light comes on when the engine’s oil levels are normal and your engine is running smoothly and quietly, then you likely have a bad oil pressure sensor.
Why Buy from Us / What makes Our Coolant Temp Sensors the best?
• As an OEM manufacturer, Standard/ Our Supplier has complete control of the manufacturing process from componentry to finished product
• All Pressure sensors are 100% factory tested to ensure trouble-free performance.