Manifold Pressure Sensor For Ford FG FALCON 6cyl & V8 2008-16 MAP SENSOR

Key Features:
  • OEM: XS6F9F479AB
  • Part Number: 0261230027
Sale

$ 64.27 $ 127.91

In stock
SKU CMS216-3
Part Number0261230027
OEMXS6F9F479AB
Add to wishlist Add to compare

Description

BRAND NEW *OEM QUALITY* Manifold Absolute Pressure (MAP) Sensor for FORD

PLEASE COMPARE YOUR ORIGINAL SENSOR WITH THE IMAGES WE PROVIDED IN THE LISTING AND CHECK THE DETAILED VEHICLE LIST IN THE SUITABILITY SECTION.

 

TO SUIT:

[2008-2016] FORD FALCON FG 4,0L ( Barra 195/ Barra ecoLPi/ Barra E-Gas)
[2008-2011] FORD FPV FALCON FG 5.4L V8 (Boss 290/ Boss 315)

OEM# XS6F9F479AA, XS6F9F479AB

  • for OE No: XS6F-9F479-AB
  • Number of pins: 4 -pin connector
  • Supplementary Article/Info 2: with integrated air temperature sensor
  • Connector Shape: oval
  • Number of mounting bores: 1
  • Pressure: from 10 kPa,¬†until 118 kPa

Features:

  • High Quality
  • OEM Fit and Design
  • Easy install
  • Simple operation
  • AU Seller-Fast and Free Shipping

Package Includes:

1* MAP SENSOR. 4 -pin connector
Manifold Absolute Pressure Sensors or MAP sensors provide instantaneous manifold pressure information to the engine’s electronic control module (ECM). The manifold absolute pressure sensor (MAP sensor) works with intake air pressure to define the proper air and fuel quantities required for the ignition cylinders. The MAP sensor measures the vacuum of the intake manifold, which fluctuates according to engine load, relative to the barometric pressure.
A faulty MAP sensor will affect an engine’s air-fuel ratio. If the ratio is incorrect, ignition inside the engine will occur at an improper time in the combustion cycle. If severe pre-detonation continues over an extended time, the internal parts of the engine (such as pistons, rods, and rod bearings) will become damaged and eventually lead to catastrophic failure

COMPATIBLE VEHICLES

[05/08 – 04/10] FORD FALCON FG I 4.0L 6cyl Barra 195 195kW
[05/08 – 11/11] FORD FALCON FG I 4.0L 6cyl Barra 195 195kW
[05/08 – 04/10] FORD FALCON FG I XR6 4.0L 6cyl Barra 195 195kW
[05/08 – 11/11] FORD FALCON FG I XR6 4.0L 6cyl Barra 195 195kW
[12/11 – 10/14] FORD FALCON FG II 4.0L 6cyl Barra 195 195kW
[12/11 – 10/14] FORD FALCON FG II XR6 4.0L 6cyl Barra 195 195kW
[11/14 – 10/16] FORD FALCON FG X 4.0L 6cyl Barra 195 195kW
[11/14 – 10/16] FORD FALCON FG X XR6 4.0L 6cyl Barra 195 195kW

[05/11 – 11/11] FORD FALCON FG I 4.0L 6cyl Barra ecoLPi 198kW
[12/11 – 10/14] FORD FALCON FG II 4.0L 6cyl Barra ecoLPi 198kW
[12/11 – 10/14] FORD FALCON FG II XR6 4.0L 6cyl Barra ecoLPi 198kW
[11/14 – 10/16] FORD FALCON FG X 4.0L 6cyl Barra ecoLPi 198kW
[11/14 – 10/16] FORD FALCON FG X XR6 4.0L 6cyl Barra ecoLPi 198kW

[05/08 – 04/11] FORD FALCON FG I 4.0L 6cyl Barra E-Gas 156kW
[05/08 – 04/11] FORD FALCON FG I XR6 4.0L 6cyl Barra E-Gas 156kW

[05/08 – 11/11] FORD FALCON FG I XR8 5.4L V8 Boss 290 290kW
[05/08 – 11/11] FPV GT FG I 5.4L V8 Boss 315 315kW
[05/08 – 11/11] FPV PURSUIT, SUPER PURSUIT FG I 5.4L V8 Boss 315 315kW

 

ABOUT YOUR VEHICLE’S MANIFOLD ABSOLUTE PRESSURE SENSOR

What does a MAP Sensor do?
The MAP sensor converts engine vacuum/manifold pressure to an electrical signal so the computer knows how much load the engine is under. This data is the basis for fuel delivery and timing control.

Where is the MAP sensor located?
The MAP sensor is typically located in the air cleaner, fender wall, firewall, intake manifold, or under the dash.

Will a malfunctioning MAP Sensor illuminate the check engine light or affect vehicle operation?
Yes, a failing sensor can illuminate the MIL and may cause the engine to have a rich or lean fuel mixture condition.

What are the common causes of failure?
Typically these sensors fail due to the constant contact of the movable wiper arm over the sensor element and the exposure to the high underhood heat.

How to determine if the MAP Sensor is malfunctioning?
The Diagnostic Monitor tests for voltages outside of the normal range. The PCM also compares actual MAP output to calculated values to determine sensor performance deterioration. The calculated values are based on TP and various engine load factors.

What makes OUR MAP Sensors the best?
As basic manufacturers, We have complete control of the manufacturing process from componentry to finished product to ensure precise operation
Our manufacturing process includes extensive use of robotics for precision assembly
100% product in-line and end-of-line inspection from raw material to packaging of the finished product

Specification

Weight0.5 kg
Dimensions23 × 16 × 3 cm
Brand

Product Type

Sensor

Sensor Type

Manifold Absolute Pressure (MAP) Sensor

OEM

XS6F9F479AB

Second Part Number

0261230027, CMS216, MAP-012, MP155, TMP008

Part Number

0261230027

Reference OE/OEM Number

XS6F-9F479-AB

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published.