Description
BRAND NEW *OEM QUALITY* MAP SENSOR (MANIFOLD ABSOLUTE PRESSURE SENSOR) TO SUIT JEEP
PLEASE COMPARE YOUR ORIGINAL SENSOR WITH THE IMAGES WE PROVIDED IN THE LISTING AND CHECK THE DETAILED VEHICLE LIST IN THE SUITABILITY SECTION.
TO SUIT:
JEEP GRAND CHEROKEE ZG-ZJ 4.0L ERH, MX, S01 [1996 – 1999]
JEEP WRANGLER TJ 4.0L ERH, MX, S01 [1997 – 2007]
OEM# 56029405
- for OE No: 56029405
- Shape: Rectangular
- Number of mounting bores: 4
- Number of pins: 3 -pin connector
- Connector Shape: oval
- Pressure: from 20 kPa, until 100 kPa
- Fitting Position: Throttle Housing, Lateral Mounting
Features:
- High Quality
- OEM Fit and Design
- Easy install
- Simple operation
- AU Seller-Fast and Free Shipping
Package Includes:
Manifold Absolute Pressure Sensor or MAP sensor provides instantaneous manifold pressure information to the engine’s electronic control module (ECM). This data is used to calculate air density and determine the engine’s air mass flow rate, which in turn determines the required fuel metering for optimum combustion.
COMPATIBLE VEHICLES:
JEEP CHEROKEE (XJ) 4.0 i 09.1996-09.2001 136 kw Closed Off-Road Vehicle
JEEP CHEROKEE (XJ) 4.0 i 09.1996-09.2001 135 kw Closed Off-Road Vehicle
JEEP CHEROKEE (XJ) 4.0 i 4×4 09.1996-09.2001 131 kw Closed Off-Road Vehicle
JEEP CHEROKEE (XJ) 4.0 i 4×4Â 01.1995-09.2001 131 kw Closed Off-Road Vehicle
JEEP CHEROKEE (XJ) 4.0 i 01.1988-09.2001 136 kw Closed Off-Road Vehicle
JEEP CHEROKEE (XJ) 4.0 i 12.1991-09.2001 135 kw Closed Off-Road Vehicle
JEEP CHEROKEE (XJ) 4.0 i 02.1999-09.2001 135 kw Closed Off-Road Vehicle
JEEP CHEROKEE (XJ) 4.0 i 07.1998-09.2001 127 kw Closed Off-Road Vehicle
JEEP GRAND CHEROKEE I (ZJ, ZG) 4.0 i 4×4 (Z) 09.1996-04.1999 130 kw Closed Off-Road Vehicle
JEEP GRAND CHEROKEE I (ZJ, ZG) 4.0 i 4×4 (Z)Â 10.1995-04.1999 130 kw Closed Off-Road Vehicle
JEEP GRAND CHEROKEE I (ZJ, ZG) 4.0 i 4×4 (ZJ) 09.1996-04.1999 135 kw Closed Off-Road Vehicle
JEEP GRAND CHEROKEE I (ZJ, ZG) 4.0 i 4×4 (ZJ) 09.1996-04.1999 132 kw Closed Off-Road Vehicle
JEEP GRAND CHEROKEE I (ZJ, ZG) 4.0 i 4×4 (ZJ)Â 09.1991-04.1999 135 kw Closed Off-Road Vehicle
JEEP GRAND CHEROKEE I (ZJ, ZG) 4.0 i 4×4 (ZJ)Â 06.1992-04.1999 132 kw Closed Off-Road Vehicle
JEEP GRAND CHEROKEE II (WJ, WG) 4.0 4×4 04.1999-08.2003 140 kw Closed Off-Road Vehicle
JEEP GRAND CHEROKEE II (WJ, WG) 4.0 4×4Â 04.1999-09.2005 140 kw Closed Off-Road Vehicle
JEEP WRANGLER II (TJ) 4.0 08.1996-11.2002 130 kw Open Off-Road Vehicle
JEEP WRANGLER II (TJ) 4.0 06.1998-08.2002 124 kw Open Off-Road Vehicle
JEEP WRANGLER II (TJ) 4.0Â 08.1996-04.2007 130 kw Open Off-Road Vehicle
JEEP WRANGLER II (TJ) 4.0Â 06.1998-04.2007 124 kw Open Off-Road Vehicle
ABOUT YOUR VEHICLES’ MAP Sensor
What does a MAP Sensor do?
The MAP sensor converts engine vacuum/manifold pressure to an electrical signal so the computer knows how much load the engine is under. This data is the basis for fuel delivery and timing control.
Where is the MAP sensor located?
The MAP sensor is typically located in the air cleaner, fender wall, firewall, intake manifold, or under the dash.
Will a malfunctioning MAP Sensor illuminate the check engine light or affect vehicle operation?
Yes, a failing sensor can illuminate the MIL and may cause the engine to have a rich or lean fuel mixture condition.
What are the common causes of failure?
Typically these sensors fail due to the constant contact of the movable wiper arm over the sensor element and the exposure to the high underhood heat.
How to determine if the MAP Sensor is malfunctioning?
The Diagnostic Monitor tests for voltages outside of the normal range. The PCM also compares actual MAP output to calculated values to determine sensor performance deterioration. The calculated values are based on TP and various engine load factors.
What makes OUR MAP Sensors the best?
As basic manufacturer, Standard has complete control of the manufacturing process from componentry to finished product to ensure precise operation
Our manufacturing process includes extensive use of robotics for precision assembly
100% product in-line and end-of-line inspection from raw material to packaging of the finished product
Reviews
There are no reviews yet.