Inlet CAMSHAFT SENSOR FOR FORD FALCON BA BF FG 4.0L 2004-16 Suits Left Hand Side

Key Features:
  • OEM: 1F3Z6B288AB, XF3Z-6B288-AA
  • Part Number: 1F3Z6B288AB
Sale

$ 38.94 $ 59.74

In stock
SKU CSCA124
Part Number1F3Z6B288AB
OEM1F3Z6B288AB, XF3Z-6B288-AA
Add to wishlist Add to compare

Description

BRAND NEW *OEM QUALITY* CAMSHAFT POSITION SENSOR TO SUIT FORD

 

 

PLEASE COMPARE YOUR ORIGINAL SENSOR WITH THE IMAGES WE PROVIDED IN THE LISTING AND

CHECK THE DETAILED VEHICLE LIST IN THE SUITABILITY SECTION.

TO SUIT:

[2002-2016] FORD FALCON BA BF FG FGX INC XR6 4.0l 6cyl All Barra Engine/LPG

[2003-2007] FORD FAIRLANE FAIRMONT BA BF 4.0L 6cyl Barra 182 190

[2004-2014] FPV F6 BA BF FG 4.0L 6cyl BARRA (TORNADO/TYPHOON)

[2004-2016] FORD TERRITORY SX SY SZ 4.0L 6cyl (Barra 182 190 195 245)

[2014-2016] FORD TERRITORY SZ II 2.7L V6 Duratorq

[2001-2005] FORD EXPLORER UT UX UZ 4.6L V8 281 cu.in Modular

 

OEM# XF3Z-6B288-AA

Number of pins2 -pin connector
Rated Voltage12 V
Fitting Depth37 mm
Connector Shaperectangular
Resistor355 Ohm
Supplementary Article/Supplementary Infowith seal

 

 

 

Features:

  • High Quality
  • OEM Fit and Design
  • Easy install
  • Simple operation
  • AU Seller-Fast and Free Shipping

Package Includes:

1* CAMSHAFT POSITION SENSOR. 2-Pin Plug.

 

The task of the camshaft sensor is to work with the crankshaft sensor to define the exact position of the crankshaft drive. Through the combination of both sensor signals, the engine control unit knows when the first cylinder is at the top dead point.

A faulty camshaft sensor can cause the following symptoms:

  • Starting difficulties
  • The engine indicator lamp comes on
  • Fault code is stored
  • The Control unit enters an emergency program

 

Reasons for failure of the camshaft sensor can be:

  • Mechanical damage
  • Break in the encoder wheel
  • Internal short circuits
  • Interruption in connection to the control unit

 

COMPATIBLE VEHICLES:

 

 

ABOUT YOUR VEHICLE’S CAMSHAFT / CRANKSHAFT POSITION SENSOR

 

What does a Camshaft/Crankshaft Position Sensor do?

The Camshaft sensor determines which cylinder is firing to establish injector synchronization and coil firing sequence in DIS systems. Crankshaft sensors set ignition timing, supply the RPM signal, and determine engine speed.

Where are these sensors located?

The Camshaft Position sensor is typically located in the cylinder head of the engine and has a cylindrical portion that inserts into the head. The Crankshaft Position sensor is normally located in the timing cover or on the side of the block with a cylindrical portion that inserts into the block.

 

Will a malfunctioning Cam or Crank Sensor illuminate the check engine light or affect vehicle operation?

Yes, a failing sensor can illuminate the MIL and may cause vehicle stalling or a no-start condition.

What are the common causes of failure?

Typically these sensors fail due to exposure to high heat.

How to determine if these sensors are malfunctioning?
Look for RPM on a scan tool while cranking the engine. If the engine runs, a scope is the best diagnostic tool.
Typical trouble codes: Crankshaft P0335; Camshaft P0340.

What makes Our Standard Camshaft and Crankshaft Position Sensors the best?

  • Integrated A/D converter and digital signal processing with a dynamically adaptive switch point improves accuracy and operation
  • Advanced circuitry protects the system from stray electro-magnetic fields and power spikes
  • Custom magnetic circuit programming calibrates the sensor while performance testing for improved timing accuracy between the target wheel and sensor output
  • 100% environmental, endurance, and end-of-line testing for Timing, Pulse Width, and Signal Amplitude ensures consistent product reliability

 

Specification

Weight0.5 kg
Dimensions23 × 16 × 3 cm
Brand

Second Part Number

CSCA124, EC0169, PC69, SC224

OEM

1F3Z6B288AB, XF3Z-6B288-AA

Reference OE/OEM Number

XF3Z-6B288-AA

Part Number

1F3Z6B288AB

Product Type

Sensor

Sensor Type

CAMSHAFT POSITION SENSOR

Make

Ford

Model

Explorer, FALCON, TERRITORY

Compatible Vehicles

FALCON BA BF FG & TERRITORY SX SY SZ 4.0 BARRA

Note

CHECK IMAGES. CONFIRM WITH OE NUMBER, Suits Inlet – Left Hand Side

EAN

9330544021928

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published.