CRANK & CAM ANGLE SENSOR FOR NISSAN NAVARA D22 D40 PATHFINDER R51 2.5L YD25DDTi 23731EC01A

Key Features:
  • Part Number: CAS-222
  • OEM: 23731-AW410, 23731-EC00A, 23731-EC01A, 23731ED01A
Sale

$ 94.60 $ 128.21

In stock
SKU CSCA132-PAIR
Part NumberCAS-222
OEM23731-AW410, 23731-EC00A, 23731-EC01A, 23731ED01A
Add to wishlist Add to compare

Description

BRAND NEW *OEM QUALITY* CRANKSHAFT / CAMSHAFT POSITION SENSOR TO SUIT NISSAN

 

LISTING IS FOR 2 PIECES X CRANKSHAFT / CAMSHAFT POSITION SENSOR

PLEASE COMPARE YOUR ORIGINAL SENSOR WITH THE IMAGES WE PROVIDED IN THE LISTING AND

CHECK THE DETAILED VEHICLE LIST IN THE SUITABILITY SECTION.

TO SUIT:

Nissan Navara D40 Spanish built models with VIN# starting with VSK with the YD25 engine

Nissan Pathfinder R51 Spanish built models with VIN# starting with VSK with the YD25 engine

Nissan Navara D40 Thai built models with VIN# starting with MNT with the YD25 engine

Nissan Navara D22 models with YD25 engine (pre 06/2008 is camshaft sensor, post 06/2008 is crankshaft sensor)

This is the crankshaft position sensor that is located on the drivers’ side of the bell housing on D22 models

D40 models, it is located on the rear of the sump on the passenger side of the vehicle.

If you are unsure if this is the one you need for your vehicle or if your vehicle is around this date range, please contact us with a VIN# to confirm for you.

 

OEM# 23731EC00A

 

Number of Poles3 -pin connector
Connector ShapeOval
Sensor TypeHall Sensor
Fitting Depth56 mm
Housing ColourBlack
Number of mounting bores1
Supplementary Article Infowithout cable pull
for OE No.23731-EC01A


Features´╝Ü

  • High Quality
  • OEM Fit and Design
  • Easy install
  • Simple operation
  • AU Seller-Fast and Free Shipping

Package Includes:

2 * CRANKSHAFT / CAMSHAFT POSITION SENSOR. 3-Pin Plug.

 

The task of the camshaft sensor is to work with the crankshaft sensor to define the exact position of the crankshaft drive. Through the combination of both sensor signals, the engine control unit knows when the first cylinder is at the top dead point.

A faulty camshaft sensor can cause the following symptoms:

  • Starting difficulties
  • The engine indicator lamp comes on
  • Fault code is stored
  • The Control unit enters an emergency program

 

Reasons for failure of the camshaft sensor can be:

  • Mechanical damage
  • Break in the encoder wheel
  • Internal short circuits
  • Interruption in connection to the control unit

 

COMPATIBLE VEHICLES:

[01/07 – 12/15] NAVARA D22 2.5L YD25DDTi DOHC 16v Turbo Diesel Direct Inj. 4cyl 98kW 5sp Man 2dr Cab Chassis 4WD
[01/07 – 12/15] NAVARA D22 2.5L YD25DDTi DOHC 16v Turbo Diesel Direct Inj. 4cyl 98kW 5sp Man 2dr Cab Chassis RWD
[01/07 – 12/15] NAVARA D22 2.5L YD25DDTi DOHC 16v Turbo Diesel Direct Inj. 4cyl 98kW 5sp Man 4dr Cab Chassis & Pickup 4WD

[12/05 – 10/15] NAVARA D40 2.5L YD25DDTi DOHC 16v Turbo Diesel Direct Inj. 4cyl 5sp Auto 4dr Cab Chassis & Pickup 4WD
[01/09 – 10/15] NAVARA D40 2.5L YD25DDTi DOHC 16v Turbo Diesel Direct Inj. 4cyl 5sp Auto 4dr Cab Chassis & Pickup RWD
[12/05 – 10/15] NAVARA D40 2.5L YD25DDTi DOHC 16v Turbo Diesel Direct Inj. 4cyl 6sp Man 2dr Cab Chassis 4WD
[12/05 – 10/15] NAVARA D40 2.5L YD25DDTi DOHC 16v Turbo Diesel Direct Inj. 4cyl 6sp Man 4dr Cab Chassis & Pickup 4WD
[01/09 – 10/15] NAVARA D40 2.5L YD25DDTi DOHC 16v Turbo Diesel Direct Inj. 4cyl 6sp Man 4dr Cab Chassis & Pickup RWD

[07/05 – 09/13] PATHFINDER R51 2.5L YD25DDTi DOHC 16v Turbo Diesel Direct Inj. 4cyl 5sp Auto 4dr Wagon 4WD
[07/05 – 09/13] PATHFINDER R51 2.5L YD25DDTi DOHC 16v Turbo Diesel Direct Inj. 4cyl 6sp Man 4dr Wagon 4WD

 

ABOUT YOUR VEHICLE’S CAMSHAFT / CRANKSHAFT POSITION SENSOR

 

What does a Camshaft/Crankshaft Position Sensor do?

The Camshaft sensor determines which cylinder is firing to establish injector synchronization and coil firing sequence in DIS systems. Crankshaft sensors set ignition timing, supply the RPM signal, and determine engine speed.

Where are these sensors located?

The Camshaft Position sensor is typically located in the cylinder head of the engine and has a cylindrical portion that inserts into the head. The Crankshaft Position sensor is normally located in the timing cover or on the side of the block with a cylindrical portion that inserts into the block.

 

Will a malfunctioning Cam or Crank Sensor illuminate the check engine light or affect vehicle operation?

Yes, a failing sensor can illuminate the MIL and may cause vehicle stalling or a no-start condition.

What are the common causes of failure?

Typically these sensors fail due to exposure to high heat.

How to determine if these sensors are malfunctioning?
Look for RPM on a scan tool while cranking the engine. If the engine runs, a scope is the best diagnostic tool.
Typical trouble codes: Crankshaft P0335; Camshaft P0340.

What makes Our Standard Camshaft and Crankshaft Position Sensors the best?

  • Integrated A/D converter and digital signal processing with a dynamically adaptive switch point improves accuracy and operation
  • Advanced circuitry protects the system from stray electro-magnetic fields and power spikes
  • Custom magnetic circuit programming calibrates the sensor while performance testing for improved timing accuracy between the target wheel and sensor output
  • 100% environmental, endurance, and end-of-line testing for Timing, Pulse Width, and Signal Amplitude ensures consistent product reliability

Specification

Weight0.5 kg
Dimensions23 × 16 × 3 cm
Brand

Part Number

CAS-222

Second Part Number

CMN2-V450, CSCA132, SC408, SS11046, TCAS199

OEM

23731-AW410, 23731-EC00A, 23731-EC01A, 23731ED01A

Reference OE/OEM Number

23731EC00A

Make

Nissan

Product Type

Sensor

Sensor Type

CRANKSHAFT POSITION SENSOR

EAN

9341554033580

Number of Sensors

2

Compatible Vehicles

NAVARA D22 D40 & PATHFINDER R51 YD25DDTi 2.5L Diesel, NISSAN NP300 NAVARA D40 YD25DDTI YD22DDT

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published.