CRANK ANGLE SENSOR CITROEN C4 C5 DS4 DS5 PEUGEOT 3008 308 EXPERT Van 508 5008 9803788880

Key Features:
  • OEM: 9675323280, 9803788880, LR056258
  • Part Number: 9675323280, 9803788880
Sale

$ 97.99 $ 139.99

In stock
SKU CAS-299-2
Part Number 9675323280, 9803788880
OEM 9675323280, 9803788880, LR056258
Add to wishlist Add to compare

Description

BRAND NEW *OEM QUALITY* CRANKSHAFT POSITION SENSOR TO SUIT CITROEN & PEUGEOT

PLEASE COMPARE YOUR ORIGINAL SENSOR WITH THE IMAGES WE PROVIDED IN THE LISTING AND CHECK THE DETAILED VEHICLE LIST IN THE SUITABILITY SECTION.

 

TO SUIT:

CITROEN C4 PICASSO I MPV (UD_) 2.0 HDi 165  09.2010-08.2013 120kw MPV
CITROEN C5 III Break (RW_) 2.0 HDi 165  04.2009- 120kw Estate
CITROEN C5 III Sedan (RD_) 2.0 HDi 165  04.2009- 120kw Saloon
CITROEN DS4 (NX_) 2.0 HDi 165  04.2011-07.2015 120kw Hatchback
CITROEN DS5 2.0 HDi 165  11.2011-07.2015 120kw Hatchback

PEUGEOT 3008 MPV (0U_) 2.0 HDi 06.2009-08.2016 120kw MP
PEUGEOT 3008 MPV (0U_) 2.0 HDi  06.2009-08.2016 120kw MPV
PEUGEOT 308 CC (4B_) 2.0 HDi  06.2009-12.2014 120kw Convertible
PEUGEOT 308 I (4A_, 4C_) 2.0 HDi  04.2012-10.2014 120kw Hatchback
PEUGEOT 308 SW I Wagon (4E_, 4H_) 2.0 HDi 04.2011-10.2014 110kw Estate
PEUGEOT 308 SW I Wagon (4E_, 4H_) 2.0 HDi  06.2009-10.2014 120kw Estate
PEUGEOT 308 SW I Wagon (4E_, 4H_) 2.0 HDi  04.2011-10.2014 110kw Estate

PEUGEOT 5008 (0U_, 0E_) 2.0 HDi  09.2009-03.2017 120kw MPV
PEUGEOT 508 I (8D_) 2.0 HDi  11.2010-12.2018 120kw Saloon
PEUGEOT 508 SW I (8E_) 2.0 HDi  11.2010-12.2018 120kw Estate
PEUGEOT EXPERT Van (VF3A_, VF3U_, VF3X_) 2.0 HDi 165 09.2009- 120kw Van
PEUGEOT EXPERT Van (VF3A_, VF3U_, VF3X_) 2.0 HDi 165  09.2009- 120kw Van
PEUGEOT RCZ 2.0 HDi  03.2010-12.2015 120kw Coupe

 

OEM# 9803788880

  • for OE No: 9803788880
  • Number of pins: 3 -pin connector
  • Connector Shape: oval
  • Sensor Type: Hall Sensor
  • Supplementary Article Info: without cable
  • Fitting Depth: 38 mm

Features:

  • High Quality
  • OEM Fit and Design
  • Easy install
  • Simple operation
  • AU Seller-Fast and Free Shipping

Package Includes:

1* CRANKSHAFT POSITION SENSOR (3-PIN PLUG)

The crankshaft position sensor is an engine management component found on virtually all modern vehicles with internal combustion engines. It monitors the position and rotational speed of the crankshaft and sends the information to the engine control unit so it can make appropriate adjustments based on operating conditions. The crankshaft speed and position are some of the most important parameters used in engine management calculations, and many engines cannot run if the crankshaft position sensor is not providing an accurate signal.

Faulty crankshaft position sensor symptoms:

  • Issues Starting the Vehicle
  • Intermittent Stalling
  • Check Engine Light Comes On
  • Uneven Acceleration
  • Engine Misfires or Vibrates
  • Rough Idle and/or Vibrating Engine
  • Reduced Gas Mileage

 

ABOUT YOUR VEHICLE’S CAMSHAFT / CRANKSHAFT POSITION SENSOR

What does a Camshaft/Crankshaft Position Sensor do?
The Camshaft sensor determines which cylinder is firing to establish injector synchronization and coil firing sequence in DIS systems. Crankshaft sensors set ignition timing, supply the RPM signal, and determine engine speed.

Where are these sensors located?
The Camshaft Position sensor is typically located in the cylinder head of the engine and has a cylindrical portion that inserts into the head. The Crankshaft Position sensor is normally located in the timing cover or on the side of the block with a cylindrical portion that inserts into the block.

Will a malfunctioning Cam or Crank Sensor illuminate the check engine light or affect vehicle operation?
Yes, a failing sensor can illuminate the MIL and may cause vehicle stalling or a no-start condition.

What are the common causes of failure?
Typically these sensors fail due to exposure to high heat.

How to determine if these sensors are malfunctioning?
Look for RPM on a scan tool while cranking the engine. If the engine runs, a scope is the best diagnostic tool. Typical trouble codes: Crankshaft P0335; Camshaft P0340.

What makes Our Standard Camshaft and Crankshaft Position Sensors the best?
Integrated A/D converter and digital signal processing with a dynamically adaptive switch point improves accuracy and operation
Advanced circuitry protects the system from stray electro-magnetic fields and power spikes
Custom magnetic circuit programming calibrates the sensor while performance testing for improved timing accuracy between the target wheel and sensor output
100% environmental, endurance, and end-of-line testing for Timing, Pulse Width, and Signal Amplitude ensures consistent product reliability

Specification

Weight .5 kg
Dimensions 23 × 16 × 5 cm
Brand

Second Part Number

0986280602, CAS-299, CSCA586, SC564

Make

CITROËN, JAGUAR, LAND ROVER, PEUGEOT

OEM

9675323280, 9803788880, LR056258

Product Type

Sensor

Sensor Type

CRANKSHAFT POSITION SENSOR

Note

CHECK IMAGES. CONFIRM WITH OE NUMBER

Reference OE/OEM Number

9803788880

EAN

4047026511345

Part Number

9675323280, 9803788880

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *