CRANK ANGLE SENSOR FITS HOLDEN V8 GEN IV LS2 6.0L VZ VE VF COMMODORE/CALAIS

Key Features:
  • OEM: 12585546, 12703627, 213-3520
  • Part Number: 12585546, 213-3520
Sale

$ 83.97 $ 129.00

In stock
SKU CSCA353-2
Part Number 12585546, 213-3520
OEM 12585546, 12703627, 213-3520
Add to wishlist Add to compare

Description

BRAND NEW *OEM QUALITY* CRANKSHAFT POSITION SENSOR TO SUIT HOLDEN/GMC

PLEASE COMPARE YOUR ORIGINAL SENSOR WITH THE IMAGES WE PROVIDED IN THE LISTING AND CHECK THE DETAILED VEHICLE LIST IN THE SUITABILITY SECTION.

 

TO SUIT:

HOLDEN GEN4 (LS2/L76/L98/L77) 6.0L & GEN4 (LS3/LSA) 6.2L V8 MOTOR

[2006-2017] HOLDEN COMMODORE  VZ VE VF
[2006-2017] HOLDEN STATESMAN/CAPRICE WL WM WN
INCLUDING BERLINA CALAIS CREWMAN CLUBSPORT GTS SENATOR MALOO

 

OEM# 12585546, 12703627, 213-3520

  • for OE No: 12585546
  • Voltage: 12 V
  • Number of pins: 3 -pin connector
  • Sensor Type: Hall Sensor
  • Supplementary Article/Info 2: without cable
  • Housing Colour: Grey

Features:

  • High Quality
  • OEM Fit and Design
  • Easy install
  • Simple operation
  • AU Seller-Fast and Free Shipping

Package Includes:

1* CRANKSHAFT POSITION SENSOR (3-PIN PLUG)

The crankshaft position sensor is an engine management component found on virtually all modern vehicles with internal combustion engines. It monitors the position and rotational speed of the crankshaft and sends the information to the engine control unit so it can make appropriate adjustments based on operating conditions. The crankshaft speed and position are some of the most important parameters used in engine management calculations, and many engines cannot run if the crankshaft position sensor is not providing an accurate signal.

Faulty crankshaft position sensor symptoms:

  • Issues Starting the Vehicle
  • Intermittent Stalling
  • Check Engine Light Comes On
  • Uneven Acceleration
  • Engine Misfires or Vibrates
  • Rough Idle and/or Vibrating Engine
  • Reduced Gas Mileage

COMPATIBLE VEHICLES

L76 MOTOR
[01/09 – 12/09] HDT VC RETRO VE GROUP 2 Gen4 L76 6.0L V8
[08/04 – 07/06] HOLDEN BERLINA VZ Gen4 L76 6.0L V8
[08/04 – 07/07] HOLDEN BERLINA VZ Gen4 L76 6.0L V8
[08/09 – 08/10] HOLDEN CALAIS VE SERIES 1 MY10 Gen4 L76 6.0L V8
[08/04 – 07/06] HOLDEN CALAIS VZ Gen4 L76 6.0L V8
[08/06 – 08/10] HOLDEN CAPRICE WM SERIES 1 Gen4 L76 6.0L V8
[01/09 – 08/10] HOLDEN COMMODORE VE SERIES 1 SS/SSV MY9.5-MY10 Gen4 L76 6.0L V8
[08/04 – 07/06] HOLDEN COMMODORE VZ Gen4 L76 6.0L V8
[08/04 – 07/06] HOLDEN CREWMAN VZ CROSS 8 Gen4 L76 6.0L V8
[01/06 – 07/07] HOLDEN CREWMAN VZ SS Gen4 L76 6.0L V8
[08/06 – 08/10] HOLDEN STATESMAN WM SERIES 1 Gen4 L76 6.0L V8

L77 MOTOR
[09/10 – 04/13] HOLDEN CALAIS VE SERIES 2 Gen4 L77 6.0L V8
[05/13 – 07/15] HOLDEN CALAIS VF SERIES 1 Gen4 L77 6.0L V8
[09/10 – 04/13] HOLDEN CAPRICE WM SERIES 2 Gen4 L77 6.0L V8
[05/13 – 07/15] HOLDEN CAPRICE WN SERIES 1 Gen4 L77 6.0L V8
[09/10 – 04/13] HOLDEN COMMODORE VE SERIES 2 SS/SSV Gen4 L77 6.0L V8
[05/13 – 07/15] HOLDEN COMMODORE VF SERIES 1 SS/SSV Gen4 L77 6.0L V8

L98 MOTOR
[01/08 – 12/09] HDT VC RETRO VE GROUP 2 Gen4 L98 6.0L V8
[01/09 – 12/10] HDT VC RETRO VE GROUP 3 Gen4 L98 6.0L V8
[01/08 – 12/09] HDT VH RETRO VE GROUP 2 Gen4 L98 6.0L V8
[01/09 – 12/10] HDT VH RETRO VE GROUP 3 Gen4 L98 6.0L V8
[08/06 – 07/09] HOLDEN BERLINA VE SERIES 1 Gen4 L98 6.0L V8
[08/06 – 07/09] HOLDEN CALAIS VE SERIES 1 Gen4 L98 6.0L V8
[01/08 – 07/09] HOLDEN CALAIS VE SERIES 1 Gen4 L98 6.0L V8
[01/09 – 08/10] HOLDEN COMMODORE VE SERIES 1 SS/SSV MY9.5-MY10 Gen4 L98 6.0L V8
[09/07 – 12/08] HOLDEN COMMODORE VE SERIES 1 SS/SSV to MY09 Gen4 L98 6.0L V8
[08/06 – 12/08] HOLDEN COMMODORE VE SERIES 1 SS/SSV to MY09 Gen4 L98 6.0L V8
[01/08 – 12/08] HOLDEN COMMODORE VE SERIES 1 SS/SSV to MY09 Gen4 L98 6.0L V8
[08/06 – 08/07] HOLDEN COMMODORE VZ Gen4 L98 6.0L V8
[01/06 – 07/07] HOLDEN CREWMAN VZ THUNDER SS Gen4 L98 6.0L V8

LS2 MOTOR
[08/06 – 03/08] HSV CLUBSPORT VE E-SERIES SERIES 1 Gen4 LS2 6.0L V8
[08/06 – 03/08] HSV GTS VE E-SERIES SERIES 1 Gen4 LS2 6.0L V8
[10/07 – 03/08] HSV MALOO VE E-SERIES SERIES 1 Gen4 LS2 6.0L V8
[08/06 – 03/08] HSV SENATOR VE E-SERIES SERIES 1 Gen4 LS2 6.0L V8

LS3 MOTOR
[08/15 – 12/17] HOLDEN CAPRICE WN SERIES 2 Gen4 LS3 6.2L V8
[04/08 – 08/09] HSV CLUBSPORT VE E-SERIES SERIES 1 Gen4 LS3 6.2L V8
[09/09 – 08/10] HSV CLUBSPORT VE E-SERIES SERIES 2 Gen4 LS3 6.2L V8
[09/10 – 04/13] HSV CLUBSPORT VE E-SERIES SERIES 3 Gen4 LS3 6.2L V8
[04/08 – 08/09] HSV GTS VE E-SERIES SERIES 1 Gen4 LS3 6.2L V8
[09/09 – 08/10] HSV GTS VE E-SERIES SERIES 2 Gen4 LS3 6.2L V8
[09/10 – 04/13] HSV GTS VE E-SERIES SERIES 3 Gen4 LS3 6.2L V8
[06/13 – 08/15] HSV MALOO VF GEN-F SERIES 1 Gen4 LS3 6.2L V8
[06/13 – 08/15] HSV SENATOR VF GEN-F SERIES 1 Gen4 LS3 6.2L V8

LSA MOTOR
[09/15 – 12/17] HSV SENATOR VF GEN-F2 SERIES 2 Gen4 LSA 6.2L V8

 

ABOUT YOUR VEHICLE’S CAMSHAFT / CRANKSHAFT POSITION SENSOR

What does a Camshaft/Crankshaft Position Sensor do?
The Camshaft sensor determines which cylinder is firing to establish injector synchronization and coil firing sequence in DIS systems. Crankshaft sensors set ignition timing, supply the RPM signal, and determine engine speed.

Where are these sensors located?
The Camshaft Position sensor is typically located in the cylinder head of the engine and has a cylindrical portion that inserts into the head. The Crankshaft Position sensor is normally located in the timing cover or on the side of the block with a cylindrical portion that inserts into the block.

Will a malfunctioning Cam or Crank Sensor illuminate the check engine light or affect vehicle operation?
Yes, a failing sensor can illuminate the MIL and may cause vehicle stalling or a no-start condition.

What are the common causes of failure?
Typically these sensors fail due to exposure to high heat.

How to determine if these sensors are malfunctioning?
Look for RPM on a scan tool while cranking the engine. If the engine runs, a scope is the best diagnostic tool. Typical trouble codes: Crankshaft P0335; Camshaft P0340.

What makes Our Standard Camshaft and Crankshaft Position Sensors the best?
Integrated A/D converter and digital signal processing with a dynamically adaptive switch point improves accuracy and operation
Advanced circuitry protects the system from stray electro-magnetic fields and power spikes
Custom magnetic circuit programming calibrates the sensor while performance testing for improved timing accuracy between the target wheel and sensor output
100% environmental, endurance, and end-of-line testing for Timing, Pulse Width, and Signal Amplitude ensures consistent product reliability

Specification

Weight 0.5 kg
Dimensions 23 × 16 × 3 cm
Second Part Number

CAS-159, CSCA353, EH0403, SC223, TCAS186

Reference OE/OEM Number

12585546

OEM

12585546, 12703627, 213-3520

Brand

EAN

9341554004351

Compatible Vehicles

HOLDEN COMMODORE VZ VE VF , CAPRICE STATSMAN WL WM WN, HOLDEN V8 GEN IV LS2 6.0L & LS3 6.2L MOTOR

Make

HOLDEN

Part Number

12585546, 213-3520

Note

CHECK IMAGES. CONFIRM WITH OE NUMBER

Product Type

Sensor

Sensor Type

CRANKSHAFT POSITION SENSOR

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. Required fields are marked *