COOLANT TEMPERATURE SENSOR FOR HOLDEN BARINA TM 2011-18 1.6L F16D4 / 1.4L A14NET

COMPATIBLE VEHICLES

[05/09 – 02/11] HOLDEN CRUZE JG 1.8L 4cyl F18D4 104kW
[03/11 – 02/13] HOLDEN CRUZE JH 1.4L 4cyl A14NET 103kW
[03/11 – 12/14] HOLDEN CRUZE JH 1.4L 4cyl A14NET 103kW
[04/13 – 12/14] HOLDEN CRUZE JH 1.6L 4cyl A16LET 132kW
[03/11 – 12/14] HOLDEN CRUZE JH 1.8L 4cyl F18D4 104kW
[07/12 – 12/14] HOLDEN CRUZE JH 1.8L 4cyl F18D4 104kW
[01/15 – 10/16] HOLDEN CRUZE JH II 1.8L 4cyl F18D4 104kW

[04/07 – 06/09] HOLDEN ASTRA AH 1.8L 4cyl Z18XER 103kW
[12/14 – 12/17] HOLDEN ASTRA PJ 1.6L 4cyl B16SHL 125kW
[12/14 – 12/17] HOLDEN ASTRA PJ 1.6L 4cyl B16SHT 147kW

[07/13 – 12/17] HOLDEN BARINA TM 1.4L 4cyl A14NET 103kW
[11/11 – 12/17] HOLDEN BARINA TM 1.6L 4cyl F16D4 85kW
[11/11 – 12/18] HOLDEN BARINA TM 1.6L 4cyl F16D4 85kW

[12/14 – 12/17] HOLDEN CASCADA CJ 1.6L 4cyl A16SHL 125kW
[12/14 – 12/15] HOLDEN CASCADA CJ 1.6L 4cyl A16SHL 125kW
[10/17 ON] HOLDEN COMMODORE ZB 2.0L 4cyl LFS 125kW
[08/14 ON] HOLDEN TRAX TJ 1.4L 4cyl A14NET 103kW
[09/12 – 12/14] HOLDEN VOLT EV PHEV 1.4L 4cyl A14XFL 63kW
[01/92 – 12/95] MASERATI 222 SR 2.8L V6 AM473 165kW
[01/12 – 12/13] OPEL CORSA D 1.4L 4cyl A14XER 74kW

ABOUT YOUR VEHICLE’S ENGINE COOLANT TEMPERATURE SENSOR

What does a Coolant Temperature Sensor do?
The Coolant Temperature sensor changes resistance with the temperature. The Coolant Temperature sensor is critical to many PCM functions such as fuel injection, ignition timing, variable valve timing, and transmission shifting.

Where are these sensors located?
The Coolant Temperature sensor is located in a coolant passage in the engine usually near the thermostat.

Will a malfunctioning Coolant Temp Sensor illuminate the check engine light or affect vehicle operation?
Yes, a failing sensor can illuminate the MIL, and cause the engine to run rich or lean. The transmission may shift incorrectly or not lock up the torque converter.

What are the common causes of failure?
Typically these sensors fail due to corrosion within the coolant system. They may also leak coolant through the wiring connector.

How to determine if these sensors are malfunctioning?
A DTC will be set if an abnormal reading occurs, P0116 for sensor performance, P0117 low input, or P0118 for high input. The coolant temperature sensor temperature reading should closely match the air charge/manifold temperature reading on a scan tool if the engine has not been run for over an hour. The sensor circuit can be checked for proper voltage using a voltmeter.

Why Buy from Us / What makes Our Coolant Temp Sensors the best?
• As an OEM manufacturer, Standard/ Our Supplier has complete control of the manufacturing process from componentry to finished product
• Temperature sensor design specifies tight tolerance thermistor response values to assure the accuracy of the temperature measurement and proper part operation
• All Coolant Temperature sensors are 100% factory tested to ensure trouble-free performance.