BRAND NEW *OEM QUALITY* ENGINE COOLANT TEMPERATURE SENSOR TO SUIT FORD
PLEASE COMPARE YOUR ORIGINAL SENSOR WITH THE IMAGES WE PROVIDED IN THE LISTING AND
CHECK THE DETAILED VEHICLE LIST IN THE SUITABILITY SECTION.
[1982-1987] FORD FALCON XE XF ( 4.1L 250 cu.in/3.3L 200 cu.in) FAIRMONT
[1979-1988] FORD FAIRLANE ZJ ZK ZL 4.1L 250 cu.in
[1982-1988] FORD LTD FD FE 4.1L 250 cu.in
[1989-1990] FORD CAPRI SA 1.6L B6F
OEM# 0280130023, 0280130026, 1639283, 92017805
|Number of connectors||2 -pin connector|
|Thread Size||M12 x 1,5 mm|
|Spanner size||19 mm|
|Tightening Torque||22 Nm|
|Sensor Type||NTC Sensor|
|Fitting Depth||18 mm|
|Supplementary Article||with seal ring|
|Switch Point||20 °C|
- High Quality
- OEM Fit and Design
- Easy install
- Simple operation
- AU Seller-Fast and Free Shipping
|FORD CAPRI SA||B6F||1.6L||4cyl||[01/89 – 12/90]|
|FORD FAIRLANE ZJ||250 cu.in||4.1L||6cyl||[10/79 – 02/82]|
|FORD FAIRLANE ZK||250 cu.in||4.1L||6cyl||[03/82 – 09/84]|
|FORD FAIRLANE ZL||250 cu.in||4.1L||6cyl||[10/84 – 05/88]|
|FORD FAIRMONT XE||250 cu.in||4.1L||6cyl||[03/82 – 09/84]|
|FORD FAIRMONT XF||250 cu.in||4.1L||6cyl||[10/84 – 12/87]|
|FORD FALCON XE||250 cu.in||4.1L||6cyl||[03/82 – 09/84]|
|FORD FALCON XF||200 cu.in||3.3L||6cyl||[10/84 – 02/93]|
|FORD FALCON XF||200 cu.in||3.3L||6cyl||[10/84 – 12/87]|
|FORD FALCON XF||250 cu.in||4.1L||6cyl||[10/84 – 02/93]|
|FORD FALCON XF||250 cu.in||4.1L||6cyl||[10/84 – 12/87]|
|FORD LTD FD||250 cu.in||4.1L||6cyl||[03/82 – 09/84]|
|FORD LTD FE||250 cu.in||4.1L||6cyl||[10/84 – 05/88]|
ABOUT YOUR VEHICLE’S ENGINE COOLANT TEMPERATURE SENSOR
What does a Coolant Temperature Sensor do?
The Coolant Temperature sensor changes resistance with the temperature. The Coolant Temperature sensor is critical to many PCM functions such as fuel injection, ignition timing, variable valve timing, and transmission shifting.
Where are these sensors located?
The Coolant Temperature sensor is located in a coolant passage in the engine usually near the thermostat.
Will a malfunctioning Coolant Temp Sensor illuminate the check engine light or affect vehicle operation?
Yes, a failing sensor can illuminate the MIL, and cause the engine to run rich or lean. The transmission may shift incorrectly or not lock up the torque converter.
What are the common causes of failure?
Typically these sensors fail due to corrosion within the coolant system. They may also leak coolant through the wiring connector.
How to determine if these sensors are malfunctioning?
A DTC will be set if an abnormal reading occurs, P0116 for sensor performance, P0117 low input, or P0118 for high input. The coolant temperature sensor temperature reading should closely match the air charge/manifold temperature reading on a scan tool if the engine has not been run for over an hour. The sensor circuit can be checked for proper voltage using a voltmeter.
Why Buy from Us / What makes Our Coolant Temp Sensors the best?
• As an OEM manufacturer, Standard/ Our Supplier has complete control of the manufacturing process from componentry to finished product
• Temperature sensor design specifies tight tolerance thermistor response values to assure the accuracy of the temperature measurement and proper part operation
• All Coolant Temperature sensors are 100% factory tested to ensure trouble-free performance.