Description
BRAND NEW *OEM QUALITY* OXYGEN SENSOR (LAMBDA SENSOR) TO SUIT TOYOTA / LEXUS (2GR-FE 2AZ-FE ENGINES) VARIOUS VEHICLES
PLEASE COMPARE YOUR ORIGINAL SENSOR WITH THE IMAGES WE PROVIDED IN THE LISTING AND CHECK THE DETAILED VEHICLE LIST IN THE SUITABILITY SECTION.
TO SUIT:
OEM# 894670E010, 894670E020, 8946707020
- for OE No: 894670E010
- Total Length: 386 mm
- Number of pins: 4 -pin connector
- Lambda Sensor: Finger probe, Thread pre-greased
Features:
- High Quality
- OEM Fit and Design
- Easy install
- Simple operation
- AU Seller-Fast and Free Shipping
Package Includes:
An oxygen sensor is generally mounted in the exhaust stream of vehicles to measure the oxygen content of the exhaust gases. The sensor will compare the oxygen content to the oxygen proportion in the air and passes that information back to the vehicle’s Engine Control Module(ECU). to allow the adjustment of the air-fuel ratio so that a car’s engine can work at its optimal fuel efficiency level.
COMPATIBLE VEHICLES
2AZ-FE ENGINES
[01/01 – 06/03] LEXUS ES300 MCV30R 3.0L V6 1MZ-FE 158kW
[12/03 – 12/10] TOYOTA AVENSIS VERSO ACM21R 2.4L 4cyl 2AZ-FE 118kW
[08/02 – 05/06] TOYOTA CAMRY ACV36R 2.4L 4cyl 2AZ-FE 112kW
[08/03 – 10/05] TOYOTA RAV4 ACA22R 2.4L 4cyl 2AZ-FE 120kW
[08/03 – 10/05] TOYOTA RAV4 ACA23R 2.4L 4cyl 2AZ-FE 120kW
[11/05 – 11/12] TOYOTA RAV4 ACA33R 2.4L 4cyl 2AZ-FE 125kW
[03/10 – 07/10] TOYOTA RAV4 ACA38R 2.4L 4cyl 2AZ-FE 125kW
[04/03 – 12/05] TOYOTA TARAGO ACR30R 2.4L 4cyl 2AZ-FE 115kW
[03/06 – 06/12] TOYOTA TARAGO ACR50R 2.4L 4cyl 2AZ-FE 125kW
[07/12 – 12/19] TOYOTA TARAGO ACR50R 2.4L 4cyl 2AZ-FE 125kW
[11/05 – 11/12] TOYOTA VANGUARD ACA33 (GREY IMPORT) 2.4L 4cyl 2AZ-FE 125kW
[07/09 – 11/11] TOYOTA CAMRY AHV40R 2.4L 4cyl 2AZ-FXE 110kW
2GR-FE ENGINES
[01/09 – 07/11] LEXUS RX350 GGL15R 3.5L V6 2GR-FE 204kW
[01/09 – 08/11] LEXUS RX350 GGL15R 3.5L V6 2GR-FE 204kW
[01/06 – 12/08] LEXUS RX350 GSU35R 3.5L V6 2GR-FE
[10/06 – 03/12] TOYOTA AURION GSV40R 3.5L V6 2GR-FE
[08/07 – 11/13] TOYOTA KLUGER GSU40R 3.5L V6 2GR-FE
[08/07 – 11/13] TOYOTA KLUGER GSU45R 3.5L V6 2GR-FE
[08/07 – 11/12] TOYOTA RAV4 GSA33R 3.5L V6 2GR-FE
[01/09 – 12/12] LEXUS RX450h GYL15R 3.5L V6 2GR-FXE 183kW
[01/12 – 12/15] LEXUS RX450h GYL15R 3.5L V6 2GR-FXE 183kW
ABOUT YOUR VEHICLE’S OXYGEN O2 SENSOR
What does an Oxygen Sensor do?
The oxygen sensor is an electronic device used to measure the amount of oxygen in a gas or liquid. It is most commonly used to measure the concentration of oxygen in exhaust gasses, to allow the adjustment of the air-fuel ratio so that a car’s engine can work at its optimal fuel efficiency level.
Where is the Oxygen Sensor located?
Most newer vehicles have more than one sensor, on the exhaust pipe, close to the engine, and another close to the muffler and catalytic converter. Having two O2 sensors means that the vehicle has two readings provided to the engine computer so that the vehicle can fine-tune its performance.
What happens when the sensor malfunctioning?
The only way to know for certain if your sensor is malfunctioning is by using a diagnostic code reader. There are some items that often point to this issue, such as:
Fuel usage increases without a change in driving habits, Reduction in car performance, the Engine runs rough which doesn’t improve after replacing spark plugs,
The engine light on the dashboard notifies the driver of an issue found by the engine computer.
What are the common causes of failure?
Some of the reasons sensors fail include:
Fuel that is contaminated
Carbon deposits on the sensor from an engine that has started to burn oil
The sensor has reached its end of life
How to determine if the Oxygen Sensor is malfunctioning?
Signs of a failing oxygen sensor:
1. Check Engine Light Is On
2. Increased exhaust emissions
3. Bad performance
Reviews
There are no reviews yet.