Description
*OEM QUALITY* 2 x Rear Wheel Speed Sensor/ ABS Sensor For HOLDEN STATESMAN / CAPRICE WM 2006 – 2013 3.6 V6, 6.0 6.2 V8
THE LISTING IS FOR 2 X REAR ABS SENSOR FITS LEFT / RIGHT
GM / ACDELCO OEM# 92211237
ALSO SUITS
HOLDEN STATESMAN / CAPRICE WM 3.6L 6.0L 2006 – 2013
HOLDEN COMMODORE / BERLINA VE 3.0L V6 SIDI 2009 – 2013 INC MY10
HOLDEN COMMODORE VE 3.6L V6 2006 – 2013 INC BERLINA CALAIS SIDI BI-FUEL LPG
HOLDEN COMMODORE VE 6.0L V8 2006 – 2013 INC BERLINA CALAIS HSV MALOO GEN4 LS2 L76 L77 L98
HSV HOLDEN VE 6.2L V8 2008 – 2013 INC CLUBSPORT GTS MALOO GEN4 LS3 BI-FUEL
PRODUCT SPECIFICATION:
| Replacement on Vehicle | Rear ( Left / Right) |
| OEM Part Number | 92211237 |
| Number of Bolt Holes | 1 |
| Connector Gender | Female |
| Connector Quantity | 1 |
| Connector Shape | Oval |
| Mounting Hardware Included | No |
| Mounting Location | Spindle |
| Mounting Type | Flange |
| O.E.M. Replacement | Yes |
| Terminal Gender | Male |
| Terminal Quantity | 2 |
| Terminal Type: | Blade |
| Wiring Harness Included: | No |
COMPATIBLE VEHICLE:
| VEHICLE MODEL | ENGINE | LITRE | CYLINDER | YEAR | POWER |
| HOLDEN CAPRICE WM SERIES 1 | HFV6 LLT SIDI | 3.6L | V6 | [08/09 – 08/10] | |
| HOLDEN CAPRICE WM SERIES 1 | HFV6 LY7 | 3.6L | V6 | [08/06 – 07/09] | |
| HOLDEN CAPRICE WM SERIES 1 | Gen4 L76 | 6.0L | V8 | [08/06 – 08/10] | 260kW |
| HOLDEN CAPRICE WM SERIES 2 | HFV6 LFX SIDI | 3.6L | V6 | [09/10 – 04/13] | |
| HOLDEN CAPRICE WM SERIES 2 | HFV6 LWR LPG | 3.6L | V6 | [09/10 – 04/13] | 180kW |
| HOLDEN CAPRICE WM SERIES 2 | Gen4 L77 | 6.0L | V8 | [09/10 – 04/13] | 260kW |
| HOLDEN STATESMAN WM SERIES 1 | HFV6 LFX SIDI | 3.6L | V6 | [08/09 – 08/10] | |
| HOLDEN STATESMAN WM SERIES 1 | HFV6 LY7 | 3.6L | V6 | [08/06 – 07/09] | |
| HOLDEN STATESMAN WM SERIES 1 | Gen4 L76 | 6.0L | V8 | [08/06 – 08/10] | 260kW |
ABOUT YOUR VEHICLE’S ABS SENSOR
What does an ABS Sensor do?
The anti-lock braking system uses an ABS or wheel sensor to monitor the wheel speed and send this information to the ABS computer. The ABS computer uses this information to prevent the brakes from locking during an emergency stop. If wheel speeds are not equal the computer modulates the anti-lock feature until the speeds are equalized.
Where are these sensors located?
The ABS sensor is typically located in each wheel hub/rotor on a four-channel ABS system. Some rear-wheel-drive applications have the sensor mounted in the rear differential.
Will a malfunctioning ABS Sensor illuminate the check engine light or affect vehicle operation?
Yes, a failing sensor can illuminate the MIL or ABS warning lamp and may cause the failure of the anti-lock braking system to operate safely and properly.
What are the common causes of failure?
Typically these sensors will fail as a result of clogging from metallic debris, brake dust, or dirt due to exposure to the harsh elements.
How to determine if these sensors are malfunctioning?
An ABS sensor can be visually inspected and the wire winding and sensor harness can be tested for opens, shorts, and proper factory specified resistance with an ohmmeter.
Reviews
There are no reviews yet.